BDF NA35 Window Film Sun Control and Heat Rejection, Natural Black 35, 36in X 12ft

BDF NA35 Window Film Sun Control and Heat Rejection Natural Black 35 (Medium) - 36in X 12ft

BDF NA35 Window Film Sun Control and Heat Rejection, Natural Black 35, 36in X 12ft

Visit the Store BDF is a premier window film company that offers a wide range of high-quality and stylish window films to customers. We have various types of window films can provide practical solutions for window-related needs, such as sun control, enhanced daytime privacy, security, decoration, opacity, and protection from UV rays. Our window films in various colors and appearance can add elegance and sophistication to your home or office. An excessive amount of water solution (16 oz. water + 8 drops liquid soap) will make handling the film easy. Spraying soapy water on the adhesive as you pull off the liner will prevent the film from being too sticky. To remove the liner, use two pieces of tape, attaching them to a corner (one on each side, facing each other). Press the tapes together, and then slowly separate the two pieces. The films are installed inside unless the film is specified as "exterior film". BDF's Natural 35 Sun Control and Heat Rejection window film not only gives your window a tinted look but also provides effective heat rejection. With a mildly dark, black tint, the Natural 35 heat rejection film still adds a decent amount of shade to your window, but it lets in a good amount of visible light. If you want an excellent combination of heat rejection and light exposure, the Natural 35 will make a great choice. Films are made in Korea. BDF NA35 provides various functions such as heat control, reducing cooling cost, and blocking UV rays while letting in a good amount of light. The medium black tint of the NA35 helps reduce glare. The number "35" in its name refers to the fact that it is rated to transmit about 45% of visible light. The NA35's black-tone nature gives it a good heat-rejecting rate of up to 42% that keeps the interior of your home or office building nice and cool. By maintaining your room at a cool, moderate temperature, resulting in lower cooling costs, you can promote a more environmentally aware lifestyle by reducing energy usage and help create a greener world. The NA35 achieves reduction of incoming heat with a balance between letting light in and having some shade. Because of the medium shade that allows more light to pass through than other darker films, the NA35 provides an excellent view out the window with a mild level of view-shielding. This makes the NA35 a great choice if some sunlight exposure is desired and privacy is not the primary concern. Good for homes and office buildings that are directly exposed to the sun which is the source of the UV rays, the NA35 window film provides an excellent UV blocking barrier. Being exposed to UV rays can cause skin problems such as premature aging skin and signs of wrinkles as well as eye problems. The NA35 film rejects about 99% of the UV rays, helping to reduce fading on your precious furniture, pictures, or other UV-sensitive belongings. More and more dual pane windows are installed in the houses around our neighbors, and BDF NA35 film is the perfect solution for these dual pane windows. Due to the nature of its medium tint, BDF NA35 film holds on to less solar heat. With the lower heat absorption, the NA35 will keep the dual pane window cool enough to remain stable. Our products come with tools needed to get your job done, and an installation guide is included to help you with a smooth installation process. With the right amount of care, practice, and patience, both installation and removal of the film should be simple and easy. Whether your windows are small, big, wide, or narrow, our products come in a variety of sizes to suit your individual needs. It is usually recommended and necessary that you have more than enough film to cover the window. CLEANING THE WINDOWS It is best to clean the window with a window scraper before any installation. A window scraper is a glass safe razor blade, usually with a handle that can scrape the glass of any contaminants without scratching the glass. Using the window scraper and installation solution all over the window will clean it of any caked-on dirt that wiping will not remove. You can use the installation solution to also clean the window, as well as any non-ammonia-based cleaners. It is recommended to also clean the surrounding area of the glass, like the frame and seals before installation. Using a no lint or low lint cloth will ensure the glass will be free of any dust. REMOVING THE BACKING LINER Attach one piece of tape to a corner of the film, half of the tape on the film and the other half extending out from the corner. Then use another piece of tape on the other side of the same corner. Both tapes should be placed slightly offset. Hold onto the two tapes and press them together to grab the film's corner tip firmly. Then slowly separate the two pieces of tape; the liner and film should separate. As you gently pull the liner away, spray the exposed adhesive side of the film with the installation solution. This will make the film heavier and easier to manage, and it will also prevent the film from sticking to itself or to anything else. WETTING THE FILM & WINDOW Spray, spray, and spray more! You need to spray a lot to make the film fully wet and to be almost flooded on the film and the window glass surface. Please remember that fully wet window and film is one of the key factors for your successful installation. To handle the film easier when separating the film and the liner, spraying soapy solution liberally on the exposed adhesive side as you pull off the liner will prevent the film from being sticky. This will prevent the adhesive side from sticking to itself, eliminating potential wrinkles and bubbles during or after installation. Once the film piece is on the window, the squeegee should be used with firm pressure to push out the soapy water solution from inside the film, so that the moisture does not continue to interfere with the adhesive after the film has been installed. REMOVING THE FILM WHEN NEEDED Your installed window film can be removed even after years. You need to soften the cured or hardened adhesive of the film to remove the film. A fabric steamer or a heat gun can heat up the film and loosen the adhesive. Using a hair dryer can work, but it will take longer. If there is remaining adhesive residue, it can be easily removed with soapy water and a window scraper. Note that for adhesive films, the removed piece is not reusable. Removing a static cling film is very easy and simple. The static cling film doesn't have the adhesive and can be removed by hand, and you can store the removed film for reuse.

Key Features

• ✅ MEDIUM, BLACK FINISH that provides minimal view-shielding for situations that require less privacy, making it ideal for heat control while letting in a lot of light.
• ✅ EXCELLENT HEAT REJECTION. Helps reduce cooling costs, especially during the summer, through effective heat rejection. Also blocks 99% of UV rays, minimizing fading on furnishings caused by the sun.
• ✅ STRONG ADHESIVE protected by release liner. For easier installation, use A LOT of soap/water mixture to soak both the adhesive side and window.
• ✅ HIGH QUALITY PERFORMANCE FILM that is sensitive by nature. Please take caution when handling the film as the slightest fold may create a permanent wrinkle.
• ✅ FREE TOOLS AND EASY INSTALLATION GUIDE to make installation DIY-friendly. Make sure the window surface is completely clean and absolutely free of any blemishes.

Shipping & Guarantees

• ✅ FREE standard shipping within the United States (3–6 business days)
• ✅ 100% money-back guarantee for lost or damaged items
• ✅ Secure checkout with encrypted payment processing
• ✅ Shipping via UPS, FedEx, and USPS
• ✅ Ships to lower 48 states only (no PO Boxes / APO / FPO)

Returns

• ✅ 30-day hassle-free returns
• ✅ Items must be unused and in original packaging
• ✅ Full refund if item is not delivered
• ✅ Guaranteed delivery within 6–7 business days

Payment Methods

✅ Credit Cards, PayPal, Shop Pay, Apple Pay, Google Pay, Amazon Pay, Meta Pay

Customer Support

✅ Questions? Contact us at Support@GiftAbay.com
We respond within 24 hours on business days.